Web Analytics Made Easy -
StatCounter

Titanium Nitride Neck Bushings Redding

If you find product , Deals.If at the time will discount more Savings So you already decide you want have Titanium Nitride Neck Bushings Redding for your, but you don't know where to get the best price for this Titanium Nitride Neck Bushings Redding . We already done the research and spend a lot of time for you. Titanium Nitride Neck Bushings Redding to find out where to get the best deal on Titanium Nitride Neck Bushings Redding.

Content:

Titanium Nitride Neck Bushings Redding.

$33.99 - $40.99
Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness ...

Product Description

Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size.

Determining Redding Bushing Size
The proper bushing size can be easily determined by measuring the outside neck diameter of your loaded cartridges with a precision micrometer or a dial caliper. Then, simply subtract .001" from the cartridge that had the smallest average neck diameter. This diameter bushing will generally size case necks just enough to create the proper press fit for the bullet.

If you are using a Type “S” style die and not turning the outside of your case necks, we suggest using a bushing .002" smaller than your smallest average neck diameter, and using the expander ball included with your Type “S” die. This size bushing will still give you minimal sizing (maximizing the life of your brass) and the expander ball will insure that each cartridge has the same bullet grip.

Redding has found that when you have cases with neck wall thicknesses on the thin side of the SAAMI tolerance, your fired case will measure considerably larger (.006" to .010" larger) than your loaded rounds. In these circumstances, Redding’s tests have shown that a bushing .001" larger (than the loaded round) may give you the desired bullet grip.


Sinclair, Issue:1B, Page:043

Type S Match Bushing Full Die Sets Redding.

$195.99 - $289.99
The Redding Type S Match Bushing Full Die Set contains a Type S Bushing Full Sizing Die and a Compeition Seating Die. ...

Product Description

The Redding Type S Match Bushing Full Die Set contains a Type S Bushing Full Sizing Die and a Compeition Seating Die. The Type S Bushing Full Die allows full length resizing while maintaining exact control of the case neck. Interchangeable bushings allow you to determine your own level of sizing and neck tension. The Competition Bullet Seating Die features a micrometer calibrated in .001" increments and floating seating stem system which help eliminate concentricity problems.
 


Big Book Catalog, Issue:68, Page:534
Sinclair, Issue:5B, Page:038

Steel Neck Bushings Redding.

$15.99 - $22.99
Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings ...

Product Description

Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size.

View other sizes:

Determining Redding Bushing Size
The proper bushing size can be easily determined by measuring the outside neck diameter of your loaded cartridges with a precision micrometer or a dial caliper. Then, simply subtract .001" from the cartridge that had the smallest average neck diameter. This diameter bushing will generally size case necks just enough to create the proper press fit for the bullet.

If you are using a Type “S” style die and not turning the outside of your case necks, we suggest using a bushing .002" smaller than your smallest average neck diameter, and using the expander ball included with your Type “S” die. This size bushing will still give you minimal sizing (maximizing the life of your brass) and the expander ball will insure that each cartridge has the same bullet grip.

Redding has found that when you have cases with neck wall thicknesses on the thin side of the SAAMI tolerance, your fired case will measure considerably larger (.006" to .010" larger) than your loaded rounds. In these circumstances, Redding’s tests have shown that a bushing .001" larger (than the loaded round) may give you the desired bullet grip.


Sinclair, Issue:1B, Page:043

Type S Bushing Full Dies Redding.

$64.99 - $274.99
Full Length resizing while maintaining exact control of the case neck is oftern desirable in one operation. The Redding Type S Bushing ...

Product Description

Full Length resizing while maintaining exact control of the case neck is oftern desirable in one operation. The Redding Type S Bushing Full Length Sizing Dies accomplish this task with the precision you would expect from Redding.

  • Uses the same interchangeable bushings as those used in Redding bushing style neck sizing dies.
  • The adjustable decapping rod allows you to adjust the bushing position, sizing only part of the neck length when desired
  • Concentricity is enhanced by the ability of the bushing to self-center on the neck of the cartridge case
  • All Type S dies are supplied with both the standard size button and a decapping pin retainer.
  • By removing the bushing and all internal parts, the Type S Bushing Full Die may also be used as a body die.

 


Big Book Catalog, Issue:68, Page:534
Sinclair, Issue:5B, Page:038
Sinclair, Issue:5B, Page:044

0 comments
post a comment