Brownells Exclusive Action Enhancement Kit For Glock® Apex Tactical Specialties Inc
If you find product , Deals.If at the time will discount more Savings So you already decide you want have Brownells Exclusive Action Enhancement Kit For Glock® Apex Tactical Specialties Inc for your, but you don't know where to get the best price for this Brownells Exclusive Action Enhancement Kit For Glock® Apex Tactical Specialties Inc . We already done the research and spend a lot of time for you. Brownells Exclusive Action Enhancement Kit For Glock® Apex Tactical Specialties Inc to find out where to get the best deal on Brownells Exclusive Action Enhancement Kit For Glock® Apex Tactical Specialties Inc.
Brownells Exclusive Action Enhancement Kit For Glock® Apex Tactical Specialties Inc.
Provided Precision Enhancement of Your Favorite Glock
The Brownells Exclusive Apex Action Enhancement Kit for Glock pistols offers Glock pistol owners a chance to improve a number of qualities in their Glock's trigger pull.
The Brownells Exclusive Apex Action Enhancement Kit for Glock pistols directly replaces Glock's factory polymer trigger, and the new design works to improve overall trigger travel, smoothen the pull, provide a clean trigger break and produce a more tactile reset.
- Built for competition use
- Features red finish
- Reduces trigger pull by about 1 pound
- Factory-implemented safeties are still in place
The Brownells Exclusive Apex Action Enhancement Kit for Glock pistols fits Glock G17, G17L, G19, G22, G23, G24, G26, G27, G31, G32, G33, G34 and G35 pistol models.
NOT FOR USE IN GEN 5 GLOCKS
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.
Big Book Catalog, Issue:71, Page:234
S&w M&p M2.0 Flat Faced Forward Set Trigger Kit Apex Tactical Specialties Inc.
Apex Tactical’s S&W M&P M2.0 Flat-Faced Forward Set Trigger Kit is an easy-to-install replacement for your M2.0’s factory trigger that gives you a lighter, smoother, and more consistent trigger pull. The solid trigger body provides a more comfortable interface with the finger for better control, while fully preserving reliable function of the factory trigger safety system.
The M&P M2.0 Flat-Faced Forward Set Trigger has significantly reduced pre-travel and over-travel, with a crisp, decisive break in between. Shorter, more positive reset means faster follow-up shots.
- Reduces overall trigger travel by about 40%
- Smooths out the trigger pull & makes it more consistent
- Lightens pull weight by approx. 2 lbs. to 4-6 lbs.
- Actual pull weight depends on the sear and trigger return springs you install (and variations in individual guns)
Apex includes two sear springs and two trigger return springs in the kit, so you can "tune" the trigger to your specific shooting needs. Choose the "duty/carry" springs to set a pull weight for duty or CCW carry pistols.
The M&P M2.0 Flat-Faced Forward Set Trigger’s contour also allows you to place your finger lower on the trigger face for extra leverage that helps you take maximum advantage of the lower pull weight. With a little attention to proper finger placement, the flat-faced forward set trigger is an excellent trigger for competition pistols.
Brownells Gun Tech™ Note: This Apex Tactical Flat-Faced Forward Set Trigger Kit is for installation in Smith & Wesson M&P M2.0 pistols ONLY, in all centerfire calibers and configurations, including M&P 2.0 Compact. Not for use in original M&P models; use #100-016-327 or #100-017-344 in original M&P pistols.
Kit includes the following components:
- Flat-Faced Forward Set Trigger
- Forward Set Sear Actuator
- 2-Dot Fully Machined Sear
- Heavy-Duty Sear Spring
- Duty/Carry Sear Spring
- Heavy-Duty Trigger Return Spring
- Duty/Carry Trigger Return Spring
- Ultimate Striker Block Kit (Striker Block, spring & Talon Tactical Tool)
- Slave pin (assists with installation of trigger return spring)
Ruger® Mk Iv® Accurizing Kit Volquartsen.
Drop-In Accurizing Kit Makes an Excellent Rimfire Pistol Even Better
Volquartsen's Ruger® Mark IV™ Accurizing Kit enables you to easily swap key factory parts with upgraded replacements to get better performance from your pistol. Includes an upgraded trigger that allows precise pre-travel and over-travel adjustment, plus upgraded hammer/strut assembly, hammer bushing, sear, plunger, and spring. After the upgrades are installed, you will enjoy noticeably smoother, tighter, and more precise operation from your Mark IV™.
The Volquartsen Ruger® Mark IV™ Accurizing Kit will give your pistol a crisp, clean 2.5 lb. trigger pull, and it also eliminates the magazine disconnect.
- Fits all variations of the Mark IV™, including 22/45™
- Gives a crisp 2.5 lb. trigger pull
- Hammer and sear are wire-EDM cut from A2 tool steel for excellent wear resistance & retention of tolerances
- Trigger’s black anodized finish matches blued guns and also provides attractive visual contrast on stainless steel guns
- Comes with necessary hex wrenches & threadlocker for installation
The Volquartsen Ruger® Mark IV™ Accurizing Kit is an easy, fast way to get even better performance and shooting enjoyment from an already excellent rimfire pistol.
1911 Trigger Pull Kits Cylinder & Slide.
Match Quality Trigger Pull In A Drop-In Kit
Each kit is tested on a Series 70-style frame to make certain it will produce the specified pull weight with little or no fitting. Parts are wire EDM cut from bar stock, honed and polished, then heat treated for years of service life. All profiles and through-holes are mechanically correct to function without hand fitting. Sear nose has correct relief angle, sear spring is narrowed to reduce pull weight. Exposed hammer edges on Ultra-Light, Super?Match and Tactical II are chamfered to minimize slide drag and clothing wear. Each kit contains a hammer, sear, disconnector, sear spring and hammer spring. ULTRA LIGHT KIT - 3.5 lb. pull weight. Ultra light, skeletonized, hammer; relieved to prevent frame rub. Ultra light match sear and disconnector. Lightened sear spring, 18 lb. hammer spring. ULTRA LIGHT SPEED II KIT - 3 lb. pull weight. Low-profile, skeletonized hammer relieved to prevent frame rub; ultra-light weight cuts lock time to a minimum. Deep, crisp serrations ensure secure thumb contact for fast, positive cocking. Properly matched spring weights give the specified pull weight and ensure positive ignition. TACTICAL II KIT - 4 lb. pull weight. Tactical II hammer with relieved sides, ultra match sear and disconnector, light sear spring, 18 lb. hammer spring. TACTICAL MATCH KIT - 4.5 lb. pull weight. Tactical hammer, sear, disconnector, light pull sear spring, 18 lb. hammer spring. Great for carry guns. WARP SPEED KIT - 3 lb. pull weight. Very low mass hammer, relieved to prevent frame rub. Low mass sear and disconnector, 18 lb. hammer spring, light pull sear spring. DUTY/CARRY KIT - 4½ lb. pull weight for duty or carry pistols. Comes with classic, military-style spur hammer, for those who prefer that style or are required to have it on duty weapons. Includes sear, disconnector, 23 lb. hammer spring, and sear spring. PROFESSIONAL KIT - 5 lb. of pull weight and is designed for military and police shooters. Gives complete trigger control in high-stress situations. Contains hammer, sear, disconnector, 23 lb. hammer spring and tactical sear spring.
1911, Issue:11, Page:018
Big Book Catalog, Issue:71, Page:112
Sinclair, Issue:1A, Page:002
Sinclair, Issue:1A, Page:016
Sinclair, Issue:1A, Page:017
SPECS: Ultra Light Kit: Special die steel, in-the-white. Hammer: Rc 50-53. .39 oz. (11.1 g) weight. Sear: .07 oz. (1.9 g) weight. Ultra Light Speed II: Tool steel, in-the-white. Hammer & Sear: Rc 50-55. .7 oz. (20g) total weight. Sear: .07 oz. (1.9 g) weight. Tactical II Kit: Special tool steel, in-the-white, Hammer. Rc 50-53. .5 oz. (14 g) weight. Sear: .09 oz. (2.5 g) weight. Tactical Match Kit: Special tool steel, in-the-white. Hammer: Rc 50-53. .52 oz. (14.7 g) weight. Sear: .09 oz, (2.5 g) weight. Warp Speed Kit: Special die steel, in-the-white. Hammer: Rc 50-53. .35 oz. (9.9 g) weight. Sear: .07 oz. (2 g) weight. Disconnector: .069 oz. (1.9 g). Duty/Carry 4½ lb. Kit: Billet alloy steel, heat treated to Rc 50-54, in-the-white. Hammer, black. Kit includes spur hammer, sear, disconnector, 23 lb. hammer spring, and sear spring. Professional 5 lb. Kit: Billet alloy steel, in-the-white. Hammer, Rc 50-54, .5 oz. (14.1 g) weight. Sear 2 oz. (5.6 g) weight. Disconnector .2 oz. (5.6 g) weight. 23 lb. hammer spring, tactical sear spring included.